Quadro® Comil® / Products
Comil Overdriven
Innovative Technology For Size Reduction
Low Heat
- Excellent for milling products with a low melting point and high fat content.
Low Dust
- Savings on dust collection/explosion retention devices.
- Minimal product loss.
- Environmentally friendly.
Optimum Particle Distribution
- Ability to achieve desired particle granulometry.
User-Friendly Design
- Quick screen change.
- Easy-clean, low maintenance.
- Flexible feeding conditions - manual, mechanical or pneumatic.
- Optimum results with plug/choke feeding.
- Expensive auxiliary volumetric feed devices not necessary.
Versatility
- Various screens and impellers with many specialized tools are available to accomplish any process requirements.
Having
trouble viewing
these
tabs? Click
here
Principle of Operation
| The infeed product is introduced into the conical screen chamber. A rotating impeller imparts a vortex flow pattern to the incoming material. The material is then forced to the screen surface by centrifugal acceleration, ensuring continuous delivery into the "action zone" between the screen and impeller. In the "action zone," the material is sized or size reduced and instantaneously discharged through the screen openings. The finished product is discharged at the bottom of the milling chamber. Particle size can be optimized by screen, impeller and/or speed selection. |
 |
|
Technical Specifications
| MODEL |
| |
197 |
194 |
196 |
198 |
199 |
| CAPACITIES (up to) |
| lb/h |
800 |
4,000(3a) |
8,000(3b) |
16,000(3c) |
32,000(3d) |
| kg/h |
360 |
1,800(3a) |
3,600(3b) |
7,200(3c) |
14,400(3d) |
| APPROXIMATE DIMENSIONS |
Length
Width (inch)
Height |
22.5
12.5
31.6 |
41.5
27.5
63 |
50
27.5
68.5 |
68
35
68 |
84
46
83 |
Length
Width (mm)
Height |
572
318
802 |
1050
700
1620 |
1270
700
174 |
1730
890
1730 |
2130
1170
2110 |
| SCREEN DIAMETER |
| inches |
5 |
8 |
12 |
24 |
30 |
| mm |
127 |
203 |
305 |
609 |
761 |
| POWER |
| Hp |
2 |
5 |
10 |
20 |
30 |
| kW |
1.5 |
4 |
7.5 |
15 |
22 |
| EQUIPMENT SCALE-UP FACTOR |
| |
1 |
5 |
10 |
20 |
40 |
- Capacities are based on standard pharmaceutical placebo with 3% crystalline cellulose (CMC).
- Capacities may vary based on product characteristics, particle granulometry, inlet and discharge conditions. Consult your local representative or Quadro for product testing.
- For some products, capacities may reach the following higher limits: (a) 15,000 lb/hr (6,800 kg/hr), (b) 35,000 lb/hr (15,900 kg/hr), (c) 60,000 lb/hr (27,000 kg/hr), (d) 120,000 lb/hr (54,500) kg/hr.
|
Available Options
- Contact and non-contact components available in a wide selection of materials (i.e. 304, 304L, 316L, etc.)
- Contact and non-contact surfaces are available in a wide range of finishes (i.e. electro-polished, mirror finish, 320 grit, etc.)
- Frame sizes and optional designs.
- Infeed chute configuration.
- Discharge shroud configuration.
- North American and C.E. design (ATEX compliant where applicable).
- Electrical options.
- Touch Screen User Interface.
- USDA compliant designs.
- Pressure vessel designs.
- Cryogenic mill design.
- Nitrogen purge and oxygen analyzer systems.
- Vacuum design.
- CIP,SIP,WIP options.
- Glove Box isolation.
|
|
|
|
An IDEX Fluid and Metering Business
